Your position: Home / Auto Remote Key & Key Shell / For Mercedes-Benz

Xhorse VVDI BE Key Pro Improved Version Complete Remote Key 3 Button / 4 Button 315MHz/433MHz for Mercedes-Benz

SKU:C01021
Sold:205
Price:
USD
$21.90
    Please select the information you wantX
  • Button:
    3 Button 4 Button
Quantity:
-
+
(1795 available)
Shipping Cost:
to
Estimated Delivery Time:
Please select the country you want to ship from
  • Description
  • Reviews

VVDI BE Key Board Only for Mercedes-Benz 315MHz/433MHZ ( Shell Included)

1. Applicable List: 705 Moto(1997-2000) NEC(2001-2005) NEC(2006-2010) BGA(after 2011)
 
2. Programmed by : All kinds of MB key programmer such as Digimaster-III ,CKM100, VVDI MB TOOL, AK500 , MBE MB-KEY OBD2, NEC-57 MB-PRO,Etc.
 
3. Frequency: 315MHZ/433MHZ
 
Xhorse VVDI BE Key Pro Features:

More compatibility
New design
High Stability
High reliability
Digital Signature
 
VVDI BE key Pro improvements: 

1. Fix the bug that W164/W639 EIS data doesn't synchronize the key.
2. Fix the bug/fault that the BE key stop work after repeatedly turn ON the ignition without remove key out from EIS/EZS for example with work on diagnostic...switch IGN OFF---ON for erase faults...then car not start
3. Fix the bug/fault of trunk remote open on cars where power lifts on trunk door mainly...
4. Fix the bug that the BE key only sent RF signal for one time, after update, the RF signal can be sent for two times when press and release the key.
5. Modify the rolling algorithm, fix some errors of BE key.
6. Add pre-roll algorithm: the HASH value can roll ahead.
7. Adopt car-grade quartz crystal, improve infrared communication stability.
8. Boost the infrared signal when you press the button. 
9. Support resetting the key frequency between 315MHZ and 433.92 in the way of VVDI MB tool or the PCB SMD resistor

Tip: VVDI MB tool has priority over the SMD resistor, which means if you reset the key frequency with VVDI MB tool at first, the SMD resistor won't work, and you need to use the VVDI MB tool to erase the frequency then use the SMD resistor.
 
The way to reset the frequency with the PCB SMD resistor:

Weld the 1K SMD resistor on the position the arrow points and the frequency is 315MHZ, after remove it will be 433.92MHZ.

Average rating: 5.0
Share your thoughts with other customers
Write a review
Product reviews can be carried out after the member login, please click here to login